在线客服

网站公告: 保定市万嘉门窗制造有限公司坚持以诚信为本的理念,本着“同等价格比质量,同等质量比价格,同等价格、同等质量比服务。”的宗旨,为广大的新老客户打造出更完善的产品。

400-0312-611

保定市万嘉门窗制造有限公司

联系人:高先生 安女士

手 机:13803126757 13082332599

电 话:0312-5060303

邮 箱:13803126757@139. com

地址:河北省保定市北市区后辛庄工业区新民路39号

当前位置:断桥铝门窗玻璃安装的技术方法
断桥铝门窗玻璃安装的技术方法: The technical method of installing the glass of the broken bridge aluminum door and window: 安装玻璃前,将裁口内的污垢清除干净,并沿裁口的全长均匀抹1~3mm厚的底油灰。 Before installing glass, dirt cutting in clean and full length cut along the mouth evenly with 1~3mm thick bottom putty. 安装长边大于1.5m或短边大于1m的玻璃,用橡胶垫并用压条和螺钉镶嵌固定。 The glass with a long edge larger than 1.5m or a short edge greater than 1m is mounted with rubber pad and fixed with strips and screws. 安装于竖框中的玻璃,应搁置在两块相同的定位垫块上,搁置点离玻璃垂直边缘的距离宜为玻璃宽度的1/4,且不宜小于150mm。 The glass installed in the vertical frame should be placed on the two same positioning pad. The distance of the shelving point from the glass perpendicular to the glass width should be 1/4 of glass width, and should not be less than 150mm. 安装于扇中的玻璃,应按开启方向确定其定位垫块的位置。定位垫块的宽度应大于所支撑的玻璃件的厚度,长度不宜小于25mm,并应符合设计要求。 The position of the location block should be determined according to the opening direction of the glass installed in the fan. The width of the location pad should be larger than the thickness of the supporting glass, and the length should not be less than 25mm, and should meet the design requirements. 玻璃安装就位后,其边缘不得和框、扇及其连接件相接触,所留间隙应为2~3mm。 When the glass is installed, the edge shall not be contacted with the frame, fan and its connections, and the gap should be 2~3mm. 玻璃安装时所使用的各种材料均不得影响泄水系统的通畅。 All kinds of materials used in glass installation shall not affect the patency of the drainage system. 玻璃镶入框、扇内,填塞填充材料、镶压线条时,应使玻璃周边受力均匀。 When glass is inserted into frame and fan, filling material and pressing line, the force around glass should be uniform.
网站建设:保定遨游公司 版权所有 © 保定市万嘉门窗制造有限公司  手机网站
联系人:安经理 服务热线:400-0312-611 电话:0312-5060303 手机:13082332599 网址:HTTP://www.bdwjmc.com
地址:河北省保定市北市区后辛庄工业区新民路39号 友链:保定保洁 护坡砖模具